CT-1 THRU CT-3 KITS SHOWN BELOW  200 MM Wide Tire Kit Starting At 2,415.00 DM Customs has developed a NEW kit for 2000 and later softail models which allows the use of a 200 mm tire while still running the stock pulley, belt, caliper, rotor and swingarm. No need to offset the transmission or primary. Requires removal of frame horns. Kits are complete with everything needed for conversion. Components listed below along with customer photos of completed bikes showing the various kits. The bike shown on the left of this page is the CT-1 kIT. 9" Raw Steel Fender And Steel Struts, Ready For Paint 18" x 5.5" S/S 40 Spoke Chrome Rim & Hub Sealed For Tubeless Tire  200/55/18 Avon Venom "R" Tire Mounted & Balanced All Mounting Hardware Included Different wide tire kits available for most Big Twins  DON'T LET THEM...... "HD"... SAY "IT CAN'T BE DONE USING THE STOCK SWINGARM!!

---

COLEMAN CANAAN CUT HIS CT-III FEDNER SHORTER JUST IN CASE YOU WANT TO SEE WHAT IT LOOKS LIKE SHORT!! CLICK ON PHOTO'S TO SEE MORE PIC'S AND LARGE IMAGES "DON'T LET THEM "HD" SAY IT CAN'T BE DONE IN A STOCK SWINGARM!

Coleman Canaan from Bay Minette,AL. and his 2001 softail night train went with the DMC CT-III kit using a set of Renegade chrome Phoenix wheels with the rear 18"X 5.5" and the 21" front with a set of the Avon Venom's. Used our Kurykyen side mount bullet turn signals and the Pro-One light bar on the triple trees for front turn siganls also the LED side mount license plate with LED brake light and used stock HD pulley and belt and barke system. Great job Coleman and thant's for the photo's Click on photo's

"NEW MAMMOTH 52 SPOKE WHEELS POWDER COATED TO ALL MOST ANY COLOR OR DIAMOND SPOKE

TC-3 KIT: RON ERWIN US AIR FORCE CIVILIAN LOGISTICS RAMSTEIN AIR BASE GERMANY..RON,PURCHASED THE TC-3 KIT WITH THE PLATINUM AIR SYSTEM WAS INSTALLED IN HIS GARAGE WITH COMMON TOOLS.PAINT BY ATTITUDE CUSTOM PAINTING OUT OF FLORDIA KURYAKYN LICENSE/TAIL LIGHT BRACKET,DIAMOND SHAPED AXLE SHAPED AXLE MOUNT SYSTEM TO MATCH THE DIAMOND THEME. WHAT AN EYE CATCHER AND GREAT JOB RON HAS DONE. CLICK ON PHOTO TO SEE MORE!!

Tony Stewart,Hartwell,GA. 2001 FXST Standard when with the racer fat/bob style fender,60 S/S spoke rear 200mm Avon Venom tire. ONE BAD ASS SPRINGER! Per Tony's EMAIL, This bike has 40,000 miles on it,the kit was installed at 27,00 THE BEST KIT ON THE MARKET THANKS TONY! "DON'T LET THEM (HD) "IT CAN BE DONE IN STOCK FRAME"

TC-3 KIT: Daniel Garcia USN His 2005 Night Train with DM Customs 9" strutless fender 18"X 5.5" and 21" powder coated rear and front 40S/S wheels with matching Avon venom tires also using the platinum air system. CLICK ON PHOTO'S FOR MORE SHOT'S

TC-3 KIT Jerry Scott, from Mulberry IN. wiht his '04 Night Train using DM Customs 18"X 5.5" black powder coated wheel and hub,laced with S/S Diamond cut spokes with the 200 mm Avon Venom "R" tire with the strutless fender with side mount license plate,also using the stock HD pulley, belt and brake system. Nice Job Jerry!

TC-1 KIT: THIS IS OUR TRADITIONAL STYLE KIT FOR SOFTAILS. PICTURE SHOWN WITH CHROME FENDER STRUTS AND SWINGARM SIDEMOUNT LICENSE PLATE WITH LED TAILLIGHT.

TC-2 KIT: HERE ARE STAGES OF THE CONVERSION BEING COMPLETED. NOTICE THAT THE FENDER IS SITTING RIGHT ON TOP THE FENDER WITHOUT SCRAPING. THIS IS ACHIEVED BY INSTALLING THE PLATNIMUM AIR RIDE SYSTEM. OLD SCHOOL LOOK.

Finished - Click on Photos for more TC-2 CT KITS 1986-PRESENT-SHOWN IS A 2004' CUSTOM SOFTAIL STANDARD WITH TC-2 200MM TIRE KIT. USING STOCK SWINGARM, PULLEY, AND BELT. 18" X 5.5 60 SPOKE WHEEL WITH BLACK POWDER COATED WHEEL AND HUB. CHROME BILLET SUPPORT BRACKETS USING OUR PRO-STREET FENDER CUT SHORTER. STANDARD KIT COMES WITH THE FOLLOWING, 40 S/S SPOKED WHEEL, 200 MM TIRE MOUNTED AND BALANCED WITH PULLEY SPACING SET. 9" CHROME OR POLISHED BILLET FENDER SUPPORT BRACKETS, 9" STEEL FENDER, MOUNTING HARDWARE AND COMPLETE INSTALLATION INSTRUCTIONS. PRICED AT $2,195.00 UPGRADE OPTIONS: SIDE MOUNT LICENSE PLATE TURN SIGNALS WITH BRAKE AND RUNNING. CHROME PULLEYS CHROME BILLET WHEELS THIS INSTALLATION CAN BE DONE AT HOME IN A FEW DAYS

TC-2 KIT:WILLIAM POLINSKY FROM NORTH HAVEN,CT. 2002 FXST STANDARD WITH THE DM CUSTOMS TC-2 KIT USING OUR SIDE MOUNT WITH LED TAILLIGHT AND BULLET CHROME MADE BY KURYAKYN. DM CUSTOMS 40 S/S 18" X 5.5" WHEEL WITH AVON VENOM 42-R 200 MM TIRE. ALSO USING STOCK HD PULLEY AND LE PERA SOLO SEAT, NICE JOB! CLICK ON PHOTO FOR MORE

TC-2 KIT: BLAKE FRIARS FINISH HIS 03'NIGHT TRAIN WITH DMC'S TC-2 KIT WITH THE HELP FROM ROMAN HIS DOG WHO WAS A BIG HELP.BLAKE IS FROM DARMOUTH NOVIA SCOTIA, CANADA. BLAKE HAS DONE AN EXTEMELY NICE JOB WITH HIS NIGHT TRAIN,USING OUR CHROME RENEGADE SLAYER WHEELS FRONT AND REAR WITH MATCHING PULLEY,CHROME SIDE MOUNT LICENSE PLATE WITH LED TAILIGHT. BLAKE USED OUR PLATINUM AIR SYSTEM TO ACHIEVE CLOSE TIRE TO FENDER LOOK, WITH OUT THE AIR PLATINUM AIR SYSTEM YOU CAN'T GET THIS LOOK.

"HAWIAN STYLE" 2007 NIGHT TRAIN CUSTOMER PETE CUNNINGHAM FROM EWA BEACH,HI. USE THE DMC 9" PRO-STREET FENDER WITH THE KURYAKYEN CHROME SIDE MOUNT WITH LED TAILLIGHT AND MINI CHROME BULLET LIGHT FOT TURN SIGNALS AND THE PRO-ONE LIGHT BAR FOR FRONT TURN SIGNAls, ALSO USED THE PLATINUM AIR RIDE SYSTEM. THIS BIKE AND CAME FROM THE HARLEY DAVIDSON FACTORY WITH THE 17" DUNLOP 200 MM TIRE AS YOU CAN SEE PETE CHANGED IT ALL THE FOR THE ULTIMATE LOOK!

"NEW" FOR 06 SOFTAILS WITH 200 MM TIRES OR ALL DEUCES STEEL REPLACEMENT FENDER.THE NEW REPLACEMENT FENDER HUGS THE 200 MM TIRE AND COMES WITH A CHROME RECESSED LICENSE PLATE HOLDER WITH LED TAILLIGHT WITH FLASHING ARROW>>>YELLOW TURN SIGNALS.WE ADDED CHROME SMALL BULLET LIGHTS REPLACing THE LARGER HD TYPE. CLICK ON PHOTO FOR ENLARGEMENT

TC-1 KIT: TERRY BURDETT FROM FLORDIA WITH HIS 02'FAT BOY WITH DM CUSTOMS TC-1 KIT WITH DUSTER FENDER,200 MM AVON TIRE, WITH A SET OF CHROME WELD RACING WHEELS FRONT AND REAR WITH MATCHING PULLEY INSTALLATION DONE BY CHOPPER DESIGN LONGWOOD FL.

NEW TC-3 KIT: CUSTOMER MIKE ROMERO 05 FAT BOY WITH DM CUSTOMS 80 S/S SPOKE WHEEL FRONT AND REAR WITH AVON VENOM 42-R 200MM TIRE WITH AIR SUSPENSION "CLICK" ON PHOTO FOR MORE PHOTO'S

TC-2 KIT: WILLIAM McHENRY, FROM HERMISTON, OR. WITH HIS 2004 FSXT SPRINGER WITH DM CUSTOMS TC-2 KIT WITH 18" X 5.5" S/S 40 SPOKE WHEEL, AVON 200 MM TIRE USING STOCK PULLEY, KURYAKEN SIDE MOUNT LICENSE PLATE, CHROME BULLET LIGHT FOR TURN SIGNALS AND BUDDY PRO-AIR SUSPENSION TO RAISE AND LOWER THE BIKE WITH A TOUCH OF A SWITCH. BILL, GOT AN ANTIQUE 1940 HD TRACTOR SEAT AND DID SOME WORK ON THE SEAT ADDING SOME GEL FOR CUSHION, DESIGNED THE BATTERY COVER FROM SCRATCH DID A LOT OF CUTTING FITTING AND WELDING. THE COVER WAS DESIGNED TO ACCOMMODATE THE IGNITION CONTROL MODULE. WHAT A GREAT JOB BILL DID TO THIS SPRINGER. CLICK ON PHOTOS FOR MORE

TC-1 KIT: CHAD MC CURRY FROM GERMANY WITH HIS 01' NIGHT TRAIN WITH DM CUSTOMS TC-1 KIT AND DM CUSTOMS 18" X 5.5" CHROME SOLID REAR WHEEL WITH 200 MM AVON TIRE. STOCK SEAT, CHROME BILLET TURN SIGNALS WITH BRAKE AND RUNNING, USING SIDE MOUNT LICENSE.

TC-1 KIT: Richard Burris from Lake City, TN. with his 2000 Night Train, with DM Customs 9" racer fender, PM Chr. wheels, matching pulley and rotors.

TC-2 KIT: Roland Bubb,from Weston,FL. 02'FAT BOY Installation of the DM Customs 200 mm TC-2 KIT was done at home. Roland selected a set of Strugis Silverado wheels for his Fat Boy 18"x5.5"rear,18"x3.5" front and matching pulley from DM Customs. Installation was started on Saturday and finished on Suday."ONE AUSOME FAT BOY" CLICK ON PHOTOS FOR MORE

TC-2 KIT: 2004 FAT BOY MR JOE STARSON FROM STAMFORD,CT. JOE USED THE DM CUSTOMS TC-2 KIT WITH THE PRO-STREET FENDER. WELD CHROME 6 PACK 18" WHEELS FRONT AND REAR WITH MATCHING PULLEY AND ROTOTRS. USING THE METZELER 200 MM REAR TIRE WITH MATCHING FRONT.KURYAKYN SIDE MOUNT LICENSE PLATE WITH LED BRAKE LIGHT. REAR FENDER PAINTED TO MATCH THE STOCK FACTORY LOOK! VERY NICE AND CLEAN JOB BY JOE. CLICK ON PHOTOS FOR MORE OF JOE'S BIKE

TC-1 KIT: Joe Calvo From Winslow,ME. 04' Fat Boy with DM Customs TC-1 KIT using Long shot fender with black powder fender suppot brackets. Renegade Chrome Nightmare 18" wheels front and rear with Avon 200 mm rear tire, matching pulley and rotors. Below photo's Joe went all out on his paint!

EZ-200 KIT: This one is Ron Perry from Buena Park, Calif. 03' Softail Standard with DM/Heartland 9" fender kit with 200 mm Metzeler tire, PM chr. Seville wheels, DM/GMA drive side pulley/brake combo.

TC-2 KIT: Bob Kennelly from Coqville,OR. Using Santee frame and a HD 2000 swingarm with DM Customs TC-2 kit with DMC's 9" Pro-Street fender,RC Componets 18" X 5.5" Wizard rear wheel with 200 mm Avon,up front is the Matching RC Componets 18"X3.5" wheel and Avon tire. Bob is also using DM Customs O-ring chain kit. Fender was re-shaped by Bob and painted. RC Wizard matching rotors, this has to one of the nicest Pre-2000 bikes we've seen yet!

BLACKED OUT NIGHT TRAIN EZ-180 KIT: PERFORMANCE MACHINE WHEELS, BLACK PM CONTROLS, CALIPERS, HEARTLAND FENDER WITH SIDE MOUNT LICENSE PLATE. BDL 3" OPEN PRIMARY BLACKED OUT AND NOTICE THE BLACK KIT STAND PRETTY COOL RIDE.

BOB DECAMP FROM ST. GENEVIEVE, MO. DID THE DMC CT III KIT ON HIS 2002 SOFTAIL STANDARD, USING THE DMC 40 S/S SPOKE WHEEL.........AND THE LA PERA SOLO SET GREAT FIT.

Mario Profita from Short Hills,NJ put the DM Customs CT-I kit on his 2004 Fat Boy. Using DM Customs S/S 40 spoke wheels front and rear. Mario when with the chrome fender support brackets for that extra clean look. Using Avon Venom's 200 mm rear and the 130 mm up front. Great job Mario and thanks for the photo's Click on photos

USN COMANDER JAMES PYLES BATTLE GROUP

US NAVAL COMANDER,JAMES PLYE STATIONED ON A CARRIER CAME TO DM CUSTOMS WITH HIS 2006 FLSTF (FAT BOY) COMANDER PYLE WANTED A COMPLETE MAKE OVER."NEW PAINT" BY ROCK N' ROLL, FROM CALIFORNIA, JIM DECIDED TO GO WITH "GHOST WATER FLAMES" WITH HIS PAINT THEME! JIM WENT WITH THE CT-III STRUTLESS FENDER,EXTREME SHREDDER,WHEELS,PULLEY,AND ROTOTS.C&C LOPRO CUSTOM SEAT WITH BLUE 1"TRIBL FLAME STICHING. WE ALSO MODIFIED HIS CORBIN TWO-UP SEAT TO FIT THE NEW FENDER. "CLICK ON PHOTO'S"

2007 "FAT BOY" MAKE OVER WITH 200 MM TIRE SISSY BAR,ETC. WITH RWD LONG SHOT FENDER WITH LED TAILLIGHT RECESSED INTO FENDER 18"WHEELS FRONT AND REAR WITH MATCHING AVON TIRES

NOW HERE'S AN 2007 "FAT BOY" WITH RWD LONG SHOT FENDER, CHROME RENEGADE WHEELS,ROTORS SISSY BAR....STOCK LOOK WITH THE 200 MM TIRE "NICE"!!!